• KARM
  • Contact us
  • E-Submission
ABOUT
ARTICLE TYPES
BROWSE ARTICLES
AUTHOR INFORMATION

Page Path

3
results for

"Ho-Sung Nam"

Filter

Article category

Keywords

Publication year

Authors

Funded articles

"Ho-Sung Nam"

Case Reports

The Application of Three-Dimensional Printed Finger Splints for Post Hand Burn Patients: A Case Series Investigation
Ho-Sung Nam, Cheong Hoon Seo, So-Young Joo, Dong Hyun Kim, Dong-Sik Park
Ann Rehabil Med 2018;42(4):634-638.   Published online August 31, 2018
DOI: https://doi.org/10.5535/arm.2018.42.4.634
The application of three-dimensional (3D) printing is growing explosively in the medical field, and is especially widespread in the clinical use of fabricating upper limb orthosis and prosthesis. Advantages of 3D-printed orthosis compared to conventional ones include its lower cost, easier modification, and faster fabrication. Hands are the most common body parts involved with burn victims and one of the main complications of hand burns are finger joint contractures. Applying orthotic devices such as finger splints are a well-established essential element of burn care. In spite of the rapid evolution of the clinical use of 3D printing, to our knowledge, its application to hand burn patients has not yet been reported. In this study, the authors present a series of patients with hand burn injuries whose orthotic needs were fulfilled with the application of 3D-printed finger splints.

Citations

Citations to this article as recorded by  
  • Motion-Mimicking Robotic Finger Prosthesis for Burn-induced Partial Hand Amputee: A Case Report
    So Young Joo, Yoon Soo Cho, Jisu Seo, Yurim Seo, Sangho Yi, Cheong Hoon Seo
    Journal of Burn Care & Research.2025; 46(1): 230.     CrossRef
  • A national survey of conservative mallet finger injury care and the potential for 3D printing to impact current practice
    Una M. Cronin, Dr. Niamh M. Cummins, Dr. Aidan O’ Sullivan, Prof. Damien Ryan, Prof. Leonard O'Sullivan
    Annals of 3D Printed Medicine.2025; 17: 100184.     CrossRef
  • Response to Letter to the Editor “Motion-Mimicking Robotic Finger Prosthesis for Burn-Induced Partial Hand Amputee: A Case Report—Correspondence”
    So Young Joo, Yoon Soo Cho, Sangho Yi, Cheong Hoon Seo
    Journal of Burn Care & Research.2025;[Epub]     CrossRef
  • 3D-printed orthoses vs. traditional plaster cast: a comparative clinical study
    Ciprian Glazer, Mihaela Oravitan, Corina Pantea, Alexandra Mihaela Stanila, Nicolae-Adrian Jurjiu, Andreea Totok, Mihai Petru Marghitas, Claudiu Avram
    Balneo and PRM Research Journal.2025; 16(Vol 16 No.): 785.     CrossRef
  • Finger Orthoses for Rehabilitation―Part I: Biomedical Insights and Additive Manufacturing Innovations
    Alireza Nouri, Lijing Wang, Hamed Bakhtiari, Yuncang Li, Cuie Wen
    Prosthesis.2025; 7(3): 62.     CrossRef
  • Hand orthoses–related factors affecting patient satisfaction and adherence: A scoping review and checklist design
    Maryam Farzad, Joy C. MacDermid, Marjan Saeedi, Steven Cuypers
    Prosthetics & Orthotics International.2025;[Epub]     CrossRef
  • Additive Manufacturing and Upper-Limb Orthoses: A Scoping Review
    Amy Gehner, Dianna Lunsford
    JPO Journal of Prosthetics and Orthotics.2024; 36(1): e25.     CrossRef
  • An adjustable and customised finger splint to improve mallet finger treatment compliance and outcomes
    Shi Lei Teng, Yoke Rung Wong, Peggy Poh Hoon Lim, Duncan Angus McGrouther
    Annals of 3D Printed Medicine.2024; 13: 100142.     CrossRef
  • Minimizing post-operative burn contracture through customized inter-phalangeal static stent: Analysis of digital vs conventional workflows - Case Report
    Shubham Sharma, Ritty Jeba E., Parag Dua, Saurav Kumar
    Journal of Indian Dental Association.2024;[Epub]     CrossRef
  • A Review on 3D Scanners Studies for Producing Customized Orthoses
    Rui Silva, Bruna Silva, Cristiana Fernandes, Pedro Morouço, Nuno Alves, António Veloso
    Sensors.2024; 24(5): 1373.     CrossRef
  • 3D printed personalized assistive devices: A material, technique, and medical condition perspective
    Srija Vennam, Vijayasankar KN, Falguni Pati
    Applied Materials Today.2024; 40: 102403.     CrossRef
  • Effectiveness of hand reconstruction techniques for the treatment of postburn contractures of the hand: A systematic review
    Christos Vosinakis, Simona Ippoliti, Efthimios Samoladas, Anna-Bettina Haidich, Irene E. Gamatsi, Lee Smith, Chryssa Pourzitaki
    Burns.2024; 50(9): 107281.     CrossRef
  • Utilization of 3D printed orthoses for musculoskeletal conditions of the upper extremity: A systematic review
    Deborah A. Schwartz, Katherine A. Schofield
    Journal of Hand Therapy.2023; 36(1): 166.     CrossRef
  • Rehabilitation interventions after hand burn injury in adults: A systematic review
    Zoë Edger-Lacoursière, Erika Deziel, Bernadette Nedelec
    Burns.2023; 49(3): 516.     CrossRef
  • Application of a 3D-Printed Writing–Typing Assistive Device in Patients with Cervical Spinal Cord Injury
    Ji Hwan Kim, Hee Seung Yang, Seung Hyun Han, Byung Min Lee, Youn Kyung Lee, Woo Sob Sim, Gwan Su Park, Seul Bin Na Lee, Min Jo
    Applied Sciences.2022; 12(18): 9037.     CrossRef
  • Application of 3D Printing Technology in the Medical Field
    Bingwei Gao, Hongjian Zhao, Hongtao Yu, Yihan Lin, Jun Liu, Jiawei Wang
    Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering).2022; 15(8): 621.     CrossRef
  • Manufacture and clinical application of the forearm pronation’s assistant tableware in the severely burned
    Jia-Jia Shi, Ying Sun, Shan-Shan Pan, Ting-Ting Xu, Jia-Jia Hua
    Burns.2021; 47(3): 684.     CrossRef
  • In-hospital professional production of patient-specific 3D-printed devices for hand and wrist rehabilitation
    M. Keller, A. Guebeli, Florian Thieringer, Philipp Honigmann
    Hand Surgery and Rehabilitation.2021; 40(2): 126.     CrossRef
  • Direct 3D Printing of a hand splint using Reverse Engineering
    J Kechagias, K Kitsakis, A Zacharias, K Theocharis, K-E Aslani, M Petousis, N A Fountas, N M Vaxevadnidis
    IOP Conference Series: Materials Science and Engineering.2021; 1037(1): 012019.     CrossRef
  • Three-dimensional Printed Customized Adjustable Mallet Finger Splint: A Cheap, Effective, and Comfortable Alternative
    Theodora Papavasiliou, Rushabh K. Shah, Stelios Chatzimichail, Lauren Uppal, Jeffrey C.Y. Chan
    Plastic and Reconstructive Surgery - Global Open.2021; 9(3): e3500.     CrossRef
  • Overview of In‐Hospital 3D Printing and Practical Applications in Hand Surgery
    Marco Keller, Alissa Guebeli, Florian Thieringer, Philipp Honigmann, Xiaojun Duan
    BioMed Research International.2021;[Epub]     CrossRef
  • Clinical Utility of an Exoskeleton Robot Using Three-Dimensional Scanner Modeling in Burn Patient: A Case Report
    So Young Joo, Seung Yeol Lee, Yoon Soo Cho, Sangho Yi, Cheong Hoon Seo
    Journal of Burn Care & Research.2021; 42(5): 1030.     CrossRef
  • Customized Power Wheelchair Joysticks Made by Three-Dimensional Printing Technology: A Pilot Study on the Environmental Adaptation Effects for Severe Quadriplegia
    Hee Dong Shin, Da Hyun Ahn, Hyun Ah Lee, Yun Kyung Lee, Hee Seung Yang, Min Jo, Seul Bin Na Lee, Gwan Su Park, Yun Sub Hwang, Woo Sob Sim, Sung-Jun Park
    International Journal of Environmental Research and Public Health.2021; 18(14): 7464.     CrossRef
  • Effectiveness of 3D-printed orthoses for traumatic and chronic hand conditions: A scoping review
    T. A. M. Oud, E. Lazzari, H. J. H. Gijsbers, M. Gobbo, F. Nollet, M. A. Brehm, David Benjamin Lumenta
    PLOS ONE.2021; 16(11): e0260271.     CrossRef
  • Trends in 3D Printing Processes for Biomedical Field: Opportunities and Challenges
    Alina Ghilan, Aurica P. Chiriac, Loredana E. Nita, Alina G. Rusu, Iordana Neamtu, Vlad Mihai Chiriac
    Journal of Polymers and the Environment.2020; 28(5): 1345.     CrossRef
  • The functional effect of 3D-printing individualized orthosis for patients with peripheral nerve injuries
    Dong-Sik Chae, Da-Ham Kim, Kyung-Yil Kang, Doo-Young Kim, Si-Woon Park, Sung-Jun Park, Jae-Hyung Kim
    Medicine.2020; 99(16): e19791.     CrossRef
  • 3D printing technologies in the treatment of patients with injuries and diseases of the forearm and hand
    V V Khominets, S A Peleshok, D A Volov, M V Titova, M I Eliseeva, S V Kushnarev, A V Shirshin, V N Adamenko, Ya I Nebylitsa
    Bulletin of the Russian Military Medical Academy.2020; 22(1): 113.     CrossRef
  • 3D printing in hand surgery
    V. Matter-Parrat, P. Liverneaux
    Hand Surgery and Rehabilitation.2019; 38(6): 338.     CrossRef
  • 10,759 View
  • 241 Download
  • 26 Web of Science
  • 28 Crossref
Diagnosis of Ilioinguinal Nerve Injury Based on Electromyography and Ultrasonography: A Case Report
Hee-Mun Cho, Dong-Sik Park, Dong Hyun Kim, Ho-Sung Nam
Ann Rehabil Med 2017;41(4):705-708.   Published online August 31, 2017
DOI: https://doi.org/10.5535/arm.2017.41.4.705

Being located in the hypogastric area, the ilioinguinal nerve, together with iliohypogastric nerve, can be damaged during lower abdominal surgeries. Conventionally, the diagnosis of ilioinguinal neuropathy relies on clinical assessments, and standardized diagnostic methods have not been established as of yet. We hereby report the case of young man who presented ilioinguinal neuralgia with symptoms of burning pain in the right groin and scrotum shortly after receiving inguinal herniorrhaphy. To raise the diagnostic certainty, we used a real-time ultrasonography (US) to guide a monopolar electromyography needle to the ilioinguinal nerve, and then performed a motor conduction study. A subsequent US-guided ilioinguinal nerve block resulted in complete resolution of the patient's neuralgic symptoms.

Citations

Citations to this article as recorded by  
  • Review of Ultrasound-Guided Procedures in the Management of Chronic Pain
    Anuj K. Aggarwal, Einar Ottestad, Kayla E. Pfaff, Alice Huai-Yu Li, Lei Xu, Ryan Derby, Daniel Hecht, Jennifer Hah, Scott Pritzlaff, Nitin Prabhakar, Elliot Krane, Genevieve D’Souza, Yasmine Hoydonckx
    Anesthesiology Clinics.2023; 41(2): 395.     CrossRef
  • Manual Therapy Treatment for Penile Pain- A Clinical Case Report with 6-Month Follow-up
    Yingzhi Li, Howe Liu, Charles Nichols, David C. Mason
    Journal of Manual & Manipulative Therapy.2022; 30(2): 124.     CrossRef
  • US-guided Musculoskeletal Interventions in the Hip with MRI and US Correlation
    Jason I. Blaichman, Brian Y. Chan, Paul Michelin, Kenneth S. Lee
    RadioGraphics.2020; 40(1): 181.     CrossRef
  • Ilioinguinal Neuropathy
    Lynn Kohan, Colleen McKenna, Anna Irwin
    Current Pain and Headache Reports.2020;[Epub]     CrossRef
  • Buttock Pain in the Athlete: the Role of Pelvic Floor Dysfunction
    Xiaoning Yuan, Anna-Christina Bevelaqua
    Current Physical Medicine and Rehabilitation Reports.2018; 6(2): 147.     CrossRef
  • 14,756 View
  • 120 Download
  • 4 Web of Science
  • 5 Crossref
Original Article
Diagnostic Value of the Second Lumbrical-Interosseous Distal Motor Latency Comparison Test in Severe Carpal Tunnel Syndrome
SangHun Lee, DongHyun Kim, Hee-Mun Cho, Ho-Sung Nam, Dong-Sik Park
Ann Rehabil Med 2016;40(1):50-55.   Published online February 26, 2016
DOI: https://doi.org/10.5535/arm.2016.40.1.50
Objective

To examine the usefulness of the second lumbrical-interosseous (2L-INT) distal motor latency (DML) comparison test in localizing median neuropathy to the wrist in patients with absent median sensory and motor response in routine nerve conduction studies.

Methods

Electrodiagnostic results from 1,705 hands of patients with carpal tunnel syndrome (CTS) symptoms were reviewed retrospectively. All subjects were evaluated using routine nerve conduction studies: median sensory conduction recorded from digits 1 to 4, motor conduction from the abductor pollicis brevis muscle, and the 2L-INT DML comparison test.

Results

Four hundred and one hands from a total of 1,705 were classified as having severe CTS. Among the severe CTS group, 56 hands (14.0%) showed absent median sensory and motor response in a routine nerve conduction study, and, of those hands, 42 (75.0%) showed an abnormal 2L-INT response.

Conclusion

The 2L-INT DML comparison test proved to be a valuable electrodiagnostic technique in localizing median mononeuropathy at the wrist, even in the most severe CTS patients.

Citations

Citations to this article as recorded by  
  • Physiological Localization by Sensory and Motor Inching Studies and Structural Abnormalities Detected by Ultrasonographic Changes in Carpal Tunnel Syndrome
    Chernkhuan Stonsaovapak, Supapich Nimithpornchai, Jun Kimura, Krisna Piravej
    Archives of Physical Medicine and Rehabilitation.2022; 103(3): 494.     CrossRef
  • Ultrasound improves motor distal latency on patients with carpal tunnel syndrome: systematic review and meta-analysis
    Alicia PERIS MOYA, José M. PÉREZ MÁRMOL, Elías F. KHOURY MARTÍN, María C. GARCÍA RÍOS
    European Journal of Physical and Rehabilitation Medicine.2022;[Epub]     CrossRef
  • Atypical Carpal Tunnel Syndromes Related to Selective Fascicular Involvement of the Median Nerve and Concurrent Recurrent Median Motor Neuropathy
    Hae In Lee, Soon Woo Kwon, Ahry Lee, Hee-Kyu Kwon
    Journal of Electrodiagnosis and Neuromuscular Diseases.2020; 22(1): 42.     CrossRef
  • Value of ultrasonography in the diagnosis of carpal tunnel syndrome—a new ultrasonographic index in carpal tunnel syndrome diagnosis
    Mihaela Perţea, Sergiu Ursu, Bogdan Veliceasa, Oxana-Mădălina Grosu, Natalia Velenciuc, Sorinel Luncă
    Medicine.2020; 99(29): e20903.     CrossRef
  • Skeletal Status in Women With Carpal Tunnel Syndrome—A 1-Yr Prospective Study
    Aleksander Kisała, Wojciech Pluskiewicz, Piotr Adamczyk
    Journal of Clinical Densitometry.2019; 22(3): 305.     CrossRef
  • 5,202 View
  • 51 Download
  • 4 Web of Science
  • 5 Crossref
TOP